F255 BODYALU BODY

Шпаклівка F255 ALU сіра, BODY, STOGRUP, СТОГРУП

Two-component polyester putty with aluminum filler. It can be recommended for working on surfaces with deep damage, has good resistance to vibrations. Ideal for use on parts that are subject to temperature changes.

Suitable for all metal and wooden surfaces.

Dries quickly: 20-30 minutes at a temperature of +23 °C. It is easily sanded with abrasive paper P80-P120, forms a perfect surface without pores.

Surfaces for application:
steel, wood, factory paint coating, 2-component fillers, polyester laminates.

Special instructions:
Do not apply on reactive (acid-hardening) primers, 1K primers and nitrocellulose materials. Also, do not apply on thermoplastic or viscoelastic coatings. In these cases, the putty should be applied only on a surface polished to metal.

Caution: Do not overdose the hardener.

Rules of application:
Mix the components to a homogeneous consistency, observing the mixing proportions: 2-3% hardener for 100% putty. Apply layers no more than 1 – 2 mm thick with a spatula, with an intermediate exposure. The suitability of the mixture for use is 3-5 minutes at +20 °C. The minimum application temperature is +10 °C.